GEOfit – Three functions in one
GEOfit (Grease, Electricity, Oil) connects the hydraulics, electrics and central lubrication to your excavator with a simple connection
Easy to use
The GEOfit coupler is easy to use. In a few seconds you can connect or disconnect your tiltrotator from the excavator.
GEOfit is the most compact solution and the only one that has central lubrication, electronics and hydraulollja in the same connection. Thanks to the transverse handle, nothing that stands out and can get stuck with other things as you are using the excavator. The handle is designed so that you can not pinch your fingers during open/close and is a big advantage compared to competing products.
Pressure relieved couplings
GEOfit is equipped with integrated preassure relieved couplings which makes it possible to connect with residual pressure in the system.
When you want to remove the tiltrotator it is important that only the right coupler can be unlocked in the case that you have a “sandwich” solution, ie. Quick Coupler and Tiltrotator in sandwich. An additional safety level is achieved as the GEOfits dust protection contains the safety plug. This makes it impossible to disconnect the “wrong” coupler by misstake.
Specification hydraulic coupling 1/2 inch and 3/4 inch
|Max operating pressure||35 MPa (350 Bar)|
|Min burst pressure||120 MPa|
|Temperature range||-30°C to +100°C|
|Material||Galvanized steel, anodized aluminum, zinc, brass|
|Sealing materials||Nitril (NBR)|
Specification electrical connection
|Number of poles||10|
|Adjustment poles to control system||XControl G2|
|Temperature range||-55°C to +125°C|
|Max current, at 20°C||22 A|
|Security barrier||Built in dust protection|