An optimized tiltrotator for compact machines using S45/S50
Steelwrist X07 is developed with a focus on agility, building height and weight that is so important for compact excavators. The X07 is optimized for machines from 5-ton where S45 or S50 are used. The X07 is often chosen with a direct mounted top. With a steelcasted structure, the weight can be lightened while strength is maximized. All you need to facilitate your work.
Gear housing, bottom and top in solid cast steel, hardened shafts and piston rods, gripper cassette that can be retrofitted and and central lubrication as option. Delivered with control systems that fit your excavator regardless if you need a two of four hose solution.
XControl if you want to have complete freedom to run all functions simultaneously or four hose system with proportional control from the excavator. Both types of control systems meet the upcoming ISO13031.
Our tiltrotators can be equipped with gripper cassette and three finger gripper that will make your excavator even more flexible. The gripper cassette can be retrofitted.
Read more here.
Our tiltrotators can be equipped directly from factory with central lubrication that fit all central lubrication systems in the market.
Read more here.
|Building height (mm)||396||401|
|Cylinder width (mm)||586||574|
|Weight from (kg)||195||196|
|Width with gripper (mm)||570||570|
|Length with gripper (mm)||791||809|
|Gripper reach (mm)||513||513|
|Weight with gripper from (kg)||245||245|
|Recommended machine weight (tonnes)||5-7||5-7|
|Top unit||S50||Direct Fit|
|Maximum tilt angle (degrees)||45||45|
|Necessary flow (litre/min)||30-50||30-50|
|Hydraulic extras without grip||1||1|
|Hydraulic extras with grip||0||0|
|Rotational speed (r/m)||8||8|
|Rotational force (kNm)||5,2||5,2|
|Tilt power (kNm)||13,8||13,8|
|Lubrication of the gear housing||Grease||Grease|