A tiltrotator for excavators and backhoe loaders between 6 and 12 tonnes
Steelwrist tiltrotator is designed to deliver the power and durability are a must for larger excavators. With a well thought-out design, raw power, precision and smoothness are combined in rotation and tilt functions. This facilitates your work and makes you flexible to take on a variety of challenging new job.
Gear housing, bottom and top in solid cast steel, hardened shafts and piston rods, dual acting tilt cylinders, gripper cassette with four finger gripper and central lubrication as options.
XControl if you want to have complete freedom to run all functions simultaneously or four hose system with proportional control from the excavator. Both types of control systems meet the upcoming ISO13031.
Our tiltrotators can be equipped with gripper cassette and four finger gripper that will make your excavator even more flexible. The gripper cassette can be retrofitted.
Our tiltrotators can be equipped directly from factory with central lubrication that fit all central lubrication systems in the market. Read more here.
|Building height (inch)||16.73||19.45|
|Cylinder width (inch)||26.61||26.69|
|Weight from (lb)||627||719|
|Width with gripper (inch)||22.76||22.76|
|Length with gripper (inch)||30.12||32.64|
|Gripper reach (inch)||20||20|
|Weight with gripper from (lb)||814||814|
|Pin distance (cc-meassure) (inch)||9.45-14.37|
|Pin distance (cc-meassure) (mm)||240-365|
|Width dipper arm (inch)||10.71|
|Shaft diameter dipper (inch)||1.57-2.36|
|Recommended machine weight (lb)||15400-26400||15400-26400|
|Top unit||S50||Direct Fit|
|Maximum tilt angle (degrees)||45||45|
|Necessary flow (gallons/min)||18-24||18-24|
|Hydraulic extras without grip||2||2|
|Hydraulic extras with grip||1||1|
|Rotational speed (r/m)||8||8|
|Rotational force (kNm)||5,4||5,4|
|Tilt power (kNm)||29||29|
|Lubrication of the gear housing||Grease||Grease|